PRODUCTS CENTER
Papua New Guinea Sinking Head Die Blank
Category:
Product Description
Sinking Head Die Blank
Stamping dies are divided into cold stamping dies (also known as cold heading dies) and hot stamping dies, which are used on stamping machines to cut, pre-form, and form the blank material into shaped parts. All of the stamping die blanks produced by our factory have undergone non-destructive ultrasonic flaw detection, ensuring no sand holes or air bubbles, and the material has high density; they are high-strength, impact-resistant, and have a long service life. We can provide other specifications and models according to customer requirements.
| Grade | Physical and mechanical properties | Recommended applications | ||
| Density | Hardness | Bending strength | ||
| YC6 | 14.7~15.1 | ≥90 | ≥1600 |
It has good wear resistance and high strength, suitable for use under normal stress conditions, and can be used to make alloy balls, template knives, spray caps, valve cores, valve seats, punch pins, rotating plugs, lining plates, bushings, guide rails, sealing rings, measuring tools, fixtures, special-shaped product structural parts, and mechanical accessories. |
| YC6X | 14.8~15.1 | ≥91 | ≥1500 | |
| YG6A | 14.8~15.0 | ≥92 | ≥1800 | |
| YG8 | 14.6~14.9 | 89.3 | ≥1800 | |
| YCC | 14.55~14.7 | 88.1 | ≥2000 |
It has good wear resistance and high strength, suitable for making nozzles and spray water hole sleeves for PDC (Polycrystalline Diamond Compact) drill bits and toothed wheel drill bits. |
| YC11C | 14.2~14.4 | 87 | ≥2200 |
It has good wear resistance and impact resistance, suitable for manufacturing high-pressure nozzles, lining plates, and bushings in the petroleum, chemical, and machinery industries. |
| YG11 | 14.3~14.6 | 87.5 | ≥2100 | |
| YG15 | 14.~14.2 | 87 | ≥2400 |
It has excellent strength and toughness, suitable for use under high-stress conditions, and can be used for sealing rings, ball mills, special-shaped product structural parts, mechanical accessories, and stamping dies. |
| YG15c | 13.9~14.1 | 86.5 | ≥2450 | |
| YG20 | 13.4~13.6 | 85 | ≥2500 |
Suitable for cold heading, cold stamping, and cold pressing dies used in the production of standard parts, bearings, tools, as well as stamping dies for bullet and shell casings. |
| Yc20C | 13.2~13.5 | 83 | ≥2600 | |
| JX10F | 14.82~14.95 | 90.5 | ≥2500 |
It has excellent wear resistance and strength, suitable for impact-resistant sealing rings, fixtures, special-shaped product structural parts, and mechanical accessories. |
|
JX6N Alloy |
14.85~15.1 | 91.5 | ≥1700 |
It is non-magnetic, has good wear resistance, and excellent corrosion resistance, suitable for parts of submersible pumps, mud pumps, acid-resistant pumps, and medical parts. |
| W7
Non-magnetic Alloy |
14.6~14.8 | 90 | ≥1600 |
It is non-magnetic, has good wear resistance, and excellent corrosion resistance, suitable for parts of submersible pumps, mud pumps, and acid-resistant pumps, as well as medical parts. |
: next page
Contact Information
Address: Building D1, Independent Pioneer Park, Tianyi Science and Technology City, 128 Chuangye Avenue, Zhuzhou City, Hunan Province
WeChat Public Number