Rhenium Pellet, Rhenium Ingot



Picture Name

Classification:

Pure Rhenium Metals


Picture Name

Accessories:


Classification: according to the different requirements of use,rhenium pellet/ingot according to the physical properties is divided into "high density rhenium pellet/ingot" and "medium density rhenium pellet/ingot", according to the chemical composition is divided into "high purity 99.99%" and "ultra high purity99.999%.

Appearance: Grey or silver metallic cylinder or square block,medium density ingot is dark grey and high density ingot is bright silver.

Application: Used as an additive for manufacturing superalloys.

Specification: 4N Grade Re≥99.99%(calculated by subtractive method,except gas element)
                        5N Grade Re≥99.999%(calculated by subtractive method,except gas element)
                        Medium density rhenium pellet/ingot, density is about 12g/cc
                        High density rhenium pellet/ingot, density is about 18.5g/cc

Size:D (12-20) * H (10-15) mm,single weight 30-50g.can be customized as per requirement

Typical chemical analysis

Impurities Trace impurities(%,max)
Element 4N Grade 5N Grade Element 4N Grade 5N Grade
Na 0.0010 0.0001 Ni 0.0001 0.00001
Mg 0.0001 0.00001 Cu 0.0001 0.00001
Al 0.0001 0.00001 Zn 0.0001 0.00001
Si 0.0005 0.00005 As 0.0001 0.00001
P 0.0001 0.00005 Zr 0.0001 0.00001
K 0.0010 0.0001 Mo 0.0010 0.0002
Ca 0.0005 0.00005 Cd 0.0001 0.00001
Ti 0.0001 0.00001 Sn 0.0001 0.00001
V 0.0001 0.00001 Sb 0.0001 0.00001
Cr 0.0001 0.00001 Ta 0.0001 0.00001
Mn 0.0001 0.00001 W 0.0010 0.0002
Fe 0.0005 0.00005 Pb 0.0001 0.00001
Co 0.0001 0.00001 Bi 0.0001 0.00001
Se 0.0001 0.00001 Tl 0.0001 0.00001
Gas element for medium density(%.max)
O 0.03 0.03 C 0.005 0.002
N 0.003 0.003 H 0.002 0.002
Gas element for high density(%.max)
O 0.003 0.003 C 0.005 0.002
N 0.003 0.003 H 0.002 0.002

Product Message